Product Code: LCM-615P
Ht: 6″ Dia: 3-1/2″ Wt: 26lbs Cs:36
Imprint Size: 2-3/4″ X 2-1/2″
Printing on Titan Tumblers
Quantity | 72 | 96 | 288 | 576 |
---|---|---|---|---|
One colour Print | $11.99 | $11.49 | $10.99 | $10.49 |
Add Colour | $1.69 | $1.59 | $1.59 | $1.59 |
4(c) |
• Setup charges $80.00(g) per colour
• When ordering less than minimum a $50.00(g) setup charge will apply
• Repeat setup within 12 months $50.00(g)
Laser Imaging
Imaging is done with a state of the art fiber laser
Quantity | 24 | 48 | 96 | 288 |
---|---|---|---|---|
One location | $14.99 | $14.59 | $13.99 | $13.59 |
Add location | $4.00 | $3.75 | $3.50 | $3.00 |
Add Personalization | $4.00 | $3.75 | $3.50 | $3.00 |
4(c) |
• Setup charges $80.00(g) per location
• When ordering less than minimum a $50.00(g) setup charge will apply
• Repeat setup within 12 months $50.00(g)
The Rebel Travel mug has a stainless steel outer shell and a food safe insulated plastic inner liner. This product provides a sound mug that will is also price conscious. Rebel is the perfect choice for clients seeking quality on a modest budget.
BUDGET WISE
STAINLESS EXTERIOR AND FOOD SAFE INTERIORGREAT INEXPENSIVE TRAVEL MUG
The food safe plastic helps as an insulator to keep the beverage hot and will not transfer the plastic taste.
Dishwasher resistance.
Machine dishwashing should be avoided with any printed product to maintain its lasting beauty. Although our product is somewhat dishwasher resistant, a lot has gone on in the industry over the past year or two. A number of the companies that produce dishwasher detergents are adding a product called citric acid. In some cases, the concentrations of this type of acid are very high, and problems have begun to surface throughout the industry. These issues are not exclusive to us, as all decorators have been working toward different strategies to combat the problem. The citric acid and alkaline in the detergents sit on the glass and ceramic, and over time, begin to attack the surfaces. This does not just affect any printing, as it slowly breaks down the glass or ceramic body’s surface. Over time, the glass surfaces will start to look pitted or foggy, but what is actually happening is that the acids and alkali are softening the surface and then an actual tiny piece of the surface breaks away. Over time the entire surface begins to look very scratched and/or cloudy. The same thing has begun to happen with the Lehr fired prints, and over time can break down the surface and begin to wash away. Ironically our E-2 printing, which is the cheaper version, is less affected by this phenomenon. However, E-2 is a baked enamel method similar to the auto body paint on your car, so it is less scratch-resistant. In commercial dishwashers, the chemicals used are different, and we rarely see this issue.
Although Lehr firing is still the more durable, we usually recommend its use in commercial settings, in domestic locations, where promotional glassware tends to be, we recommend going with the “E-2” product. These combinations appear to be the best scenarios for the current market. In some cases where it is necessary to use transfers, Lehr firing is the only option.
Again, the issues noted above are rare but do exist, so we would always encourage hand washing where possible. As a result of these recent changes in the industry, we, unfortunately, do not offer a warranty on dishwasher resistance or scratch resistance on our products.
One last note. Due to the construction of ALL stainless steel type tumblers and cups, they should always be hand washed and should not be put in the dishwasher. Prints may scratch over time as a result of use because the imprint is not a baked or fired application.