2oz Clear Heavy Base Shot Glass
Product Code: 50126-GP2
Quantity: 12
CLEARANCE STOCK.
All clearance product sold at the Kalvanna Line is sold as is and is a final sale with no refunds available. Any defects in the product are outlined in the description and issues with decorating on items purchased as clearance must be received in our office within 5 working days. In some cases additional product can be purchased to fill out an order, or to perhaps purchased in the future. Contact our office with your inquiry.
All Clearance Product is coded(c) and has a setup of charge of $40(g) unless otherwise indicated.
NOTE: Setup charge waived if entire lot is purchased.
Stock is adjusted live so units shown should be available a first come first serve bases.
Note: This item must be purchased as a lot
BLANK STOCK
Quantity | 12 |
---|---|
Blank | $5.00 |
(c) |
1 COLOUR PRINT (E-2 Printing)
Quantity | 12 |
---|---|
1 colour Print | $8.75 |
(c) |
Set up charged ($40) is waived
when entire lot is purchased
SAND CARVED & COLOUR FILLED
Quantity | 12 |
---|---|
1 colour Print | $11.75 |
(c) |
Set up charged ($40) is waived
when entire lot is purchased
PACKAGING
DISHWASHER RESISTANCE.
Machine dishwashing should be avoided with any printed product to maintain its lasting beauty. Although our product is somewhat dishwasher resistant, a lot has gone on in the industry over the past year or two. A number of the companies that produce dishwasher detergents are adding a product called citric acid. In some cases, the concentrations of this type of acid are very high, and problems have begun to surface throughout the industry.
Every company is affected
These issues are not exclusive to us, as all decorators have been working toward different strategies to combat the problem. The citric acid and alkaline in the detergents sit on the glass and ceramic, and over time, begin to attack the surfaces. This does not just affect any printing, as it slowly breaks down the glass or ceramic body’s surface. Over time, the glass surfaces will start to look pitted or foggy, but what is actually happening is that the acids and alkali are softening the surface and then an actual tiny piece of the surface breaks away. Over time the entire surface begins to look very scratched and/or cloudy.
Can affect all production types
The same thing has begun to happen with the Lehr fired prints, and over time can break down the surface and begin to wash away. Ironically our E-2 printing, which is the cheaper version, is less affected by this phenomenon. However, E-2 is a baked enamel method similar to the auto body paint on your car, so it is less scratch-resistant. In commercial dishwashers, the chemicals used are different, and we rarely see this issue.
Although Lehr firing is still the more durable, we usually recommend its use in commercial settings, in domestic locations, where promotional glassware tends to be, we recommend going with the “E-2” product. These combinations appear to be the best scenarios for the current market. In some cases where it is necessary to use transfers, Lehr firing is the only option.
Again, the issues noted above are rare but do exist, so we would always encourage hand washing where possible. As a result of these recent changes in the industry, we, unfortunately, do not offer a warranty on dishwasher resistance on our products.
One last note.
Due to the construction of ALL stainless steel type tumblers and cups, they should always be hand washed and should not be put in the dishwasher.